Solid State Power Amplifier
发布时间:2022-07-18 11:23:51 点击:1036
Model : HYAMP027029-53C
Solid State Power Amplifier
50 ohm input/output impedance
50 ohm input/output impedance
SPECIFICATIONS @ +28VDC, 25°C, 50 Ω System
Parameter | Symbol | Min | Typ | Max | Unit | ||||||||||||||||||||||||
Operating Frequency | BW | 2.7 | 2.9 | GHz | |||||||||||||||||||||||||
Output Power CW | PSAT | 53 | dBm | ||||||||||||||||||||||||||
Power Gain @ rated P1 dB Gain@25℃ | G1dB | 45 | dB | ||||||||||||||||||||||||||
Input Power for Nominal Output | Pin | 10 | dBm | ||||||||||||||||||||||||||
Small Signal Gain Flatness | ΔG | ±0.5 | ±0.75 | dB | |||||||||||||||||||||||||
Input Return Loss | S11 | --15 | dB | ||||||||||||||||||||||||||
2nd Hamonic | --30 | --40 | dB | ||||||||||||||||||||||||||
Spurious Signals | Spur | --70 | --60 | dBc | |||||||||||||||||||||||||
Operating Voltage | VDD | 28 | Volt | ||||||||||||||||||||||||||
Current Consumption @ 200W | 18 | 20 | Amp |
MECHANICAL SPECIFICATIONS
Parameter | Value | Units | Limits | ||||||||||||||||||||||||||
Dimensions | 200*140*22 | mm | Max | ||||||||||||||||||||||||||
RF Connectors In/Out | SMA female | ||||||||||||||||||||||||||||
DC Connectors | THROUGH HOLE CAPACITY |
ENVIRONMENTAL CHARACTERISTICS(Design To Meet)
Parameter | Symbol | Min | Typ | Max | Unit | ||||||||||||||||||||||||
Operating Case Temperature | Tc | --20 | 70 | ℃ | |||||||||||||||||||||||||
Storage Temperature | Tstg | --40 | +70 | ℃ |
外形图(接口连接器)
Description | Specifications | ||||||||||||||||||||||||||||
VDD1 | +28VDC±0.5V | ||||||||||||||||||||||||||||
VDD2 | +12VDC±0.5V | ||||||||||||||||||||||||||||
ON/OFF | Amplifier Enable:TTL“Low” (Logic 0) or Open Amplifier Disable:TTL“High”(Logic 1) |