Solid State Power Amplifier
发布时间:2022-07-19 09:54:49 点击:1114
Model: WTAMP-C1-55P
Solid State Power Amplifier
50 ohm input/output impedance
High reliability and ruggedness
SPECIFICATIONS @ 25°C, 50 Ω System
Parameter | Symbol | Min | Typ | Max | Unit | ||||||||||||||||||||||||
Operating Frequency | BW | C1 Band(4.4-5.1GHz) | GHz | ||||||||||||||||||||||||||
Output Power @ P3 dB Gain Compression Point | P3dB | 55 | dBm | ||||||||||||||||||||||||||
Gain | G | 60 | dB | ||||||||||||||||||||||||||
Gain flatness | ΔG | ±1.5 | dB | ||||||||||||||||||||||||||
Input Power for Nominal Output | --4 | dBm | |||||||||||||||||||||||||||
Input VSWR | 1.5 | ||||||||||||||||||||||||||||
Output VSWR | 1.8 | ||||||||||||||||||||||||||||
Harmonic wave | H | --20 | dBc | ||||||||||||||||||||||||||
Spurious Signals | Spur | --60 | dBc | ||||||||||||||||||||||||||
Operating Voltage – (single) | Vac | 180 | 220 | 260 | Volt | ||||||||||||||||||||||||
AC Power Consumption @ 300 W | PD | 100 | Watt |
MECHANICAL SPECIFICATIONS
Parameter | Units | Limits | |||||||||||||||||||||||||||
Dimensions | 480×449.5×88.9 | mm | Max | ||||||||||||||||||||||||||
Weight | 15(Max) | Kg | |||||||||||||||||||||||||||
RF In Connector | SMA female | ||||||||||||||||||||||||||||
RFout Connectors | N female | ||||||||||||||||||||||||||||
Cooling | Forced Air Cooling |
ENVIRONMENTAL CHARACTERISTICS(Design To Meet)
Parameter | Symbol | Min | Typ | Max | Unit | ||||||||||||||||||||||||
Operating Case Temperature | Tc | --10 | +65 | ℃ | |||||||||||||||||||||||||
Relative humidity | 95 | % | |||||||||||||||||||||||||||
Vibration /shock | MIL-STD-810F method 514.5 |
PROTECTIONS
Input Overdrive | +10dBm | Max | |||||||||||||||||||||||||||
Load VSWR @ Rated POUT | ∞ @ all load phase & amplitude for duration of 1 minute 3:1 @ all load phase & amplitude continuous | - | |||||||||||||||||||||||||||
Thermal Overload | Graceful degradation | Max |
OUTLINE DRAWING